Custom-Made Pump Kleen®
Pumpout Boats & Floating Restrooms

Call us for a quote


19' Pumpout Boats by Marine Boat Builders Company

19 ft Pumpout Boats Specifications

We are pleased to introduce our new, 19’ Patrol Boat. This is our third generation new mold. Built and designed from our 15 years of experiences building, patrol, work boats, and Pumpout boats. Our boats are built for safety, simplicity, and stability. There is no wood in our boats, not in the hull, not in the deck, not in the transom.

MODIFIED V HULL DESIGN - 19 ft Pumpout Boat

Our hull bottom is concave not convex like most hulls. This allows for maximum stability, and ease of handling. Our boat because of its design will not yaw in a following sea. The hull is constructed with a combination of hand laid woven, roving, and gun roving. All fiberglass is "E" glass and the resin is thermo set polyester. The gelcoat is ISO NPG thermo set gelcoat, normally 1.5" thick. Our boat has a 10-degree dead rise at the stern, which allow the boat to plane quickly. The hull transom is a composite laminate 1.5" thick, a total of 3" thick. There is no wood in the transom.

STRINGER SYSTEM - 19 ft Pumpout Boat

Our stringer system is a U channel all fiberglass state of the art system. There is no wood in our stringer system.

DECK, FLOOR AND SIDES - 19 ft Pumpout Boat

There is a full fiberglass liner for floor and sides.The deck has 5 (five) cleats, two chalks and running lights. All cleats, chalks, and running lights are stainless pop ups.

This lets you recess all items on the bow so that when you pull up along other boats you have less chance of damaging your boat, or the other. This is just another example of the differences between our product, and that of others. We have listened to our customers for twelve years, and have made this boat the best there is.

FOAMED FLOTATION - 19 ft Pumpout Boat

Two-part thermostat foam is injected between the floor and hull in areas not occupied by tank and other equipment.

QUALITY GELCOAT - 19 ft Pumpout Boat

Only storm and blister resistant gelcoat is used to form the skin of each PUMPOUT boat, wide varieties of colors are available. White is our standard color included in the quote price; other color choices would be extra cost.

FUEL TANK - 19 ft Pumpout Boat

The fuel tank is 34 gallons and located below the deck.


  • Large size center console with windshield.
  • Grab rail around windshield.
  • Running lights.
  • Stainless steel bow eye and transom tie-downs.
  • Two 3" scuppers.
  • Heavy-duty rub rail.
  • 1100 G.P.M. automatic bilge pump. Ritchie compass.
  • One deep cycle series batteries, with (1) non-feed back battery switch.
  • Raw water wash down pump.
  • Seat in front of center console.
  • Two pop up cleats on each side and one pop up cleat on bow.
  • Four mushroom cleats inside of deck.
  • Pop up lights and chalks.
  • Full coast guard package.


  • Overall length: 19’
  • Beam: 7’10"
  • Draft: 10" lightship; 12" full load
  • Dead rise: 10 degrees
  • Transom angle: 12 degrees
  • Approx. weight: 1,650 lbs. Lightship
  • HP rating: 180 HP
  • Freeboards: 26" forward, 20" aft.


We offer a five (5) year warranty on the hull and a 5-year warranty in the holding tank. This warranty applies as long as the boat is used as a Pumpout boat only.

Previous | Next

©2012 Marine Boatbuilders Company, Warwick RI  |  info@marineboatbuilders.com  |  401.732.1975

Home  |  About Us  |  Our Boats  |  References  |  News  |  Photos  |  Get a Quote  |  Contact Us

19' Pumpout Boats  |  20' Pumpout Boats  |  23' Pumpout Boats  |  26' Pumpout Boats  |  31' Pumpout Boats  | 

Used Pumpout Boats  |  19' Patrol Boats  |  23' Patrol Boats  |  ADA Compliant Floating Restrooms

Website Designed by AQ  |  Website Admin  |  Sitemap  |  Copyright 2012

like Marine BoatBuilders on Facebook  write a review on Google Places