Custom-Made Pump Kleen®
Pumpout Boats & Floating Restrooms
Warwick, Rhode Island
401-732-1975
Marine Boatbuilders Company specializes in designing and manufacturing custom made Pump Kleen® 23' pumpout boats. Our 23 foot pumpout boats are built for safety, simplicity and stability. Our unique PUMP KLEEN® System offers many benefits over our competitor's pumpout boats. In addition, our boats are not made with wood, not in the hull, not in the deck, not in the transom.
Our Pumpout Boat hull bottom is concave not convex like most hulls. This allows for maximum stability, and ease of handling. Our pumpout boat because of its design will not yaw in a following sea. The hull is constructed with a combination of hand laid woven, roving, and gun roving. All fiberglass is “E” glass and the resin is thermo set polyester. The gelcoat is ISO NPG thermo set gelcoat, normally 1.5” thick. Our pumpout boat has a 10-degree dead rise at the stern, which allow the boat to plane quickly. The hull transom is a composite laminate 2” thick, and 1” fiberglass a total of 3” thick. There is no wood in the transom.
Our stringer system is a U channel all fiberglass state of the art system. There is no wood in our stringer system.
The deck is a combination of hand laid woven, roving, and gun roving. Fiberglass “E” glass applied and the resin is thermostat gelcoat (white). Deck has a 12” step up in the bow area that is 48” long. It includes two forward large stowage areas with fiberglass hatches. The deck is free from any pumps, vents, or pipes of any kind leaving much-needed extra workspace, and NO trip hazards. Our floor is fiberglass composite, not wood like other boats there is NO wood in our deck, floor or in our boat. The deck is finished with non-skid on horizontal surfaces. Our deck is self-bailing at all times; weather containment cell is full or empty.
Two-part thermostat foam is injected between the floor and hull in areas not occupied by tankage and other equipment.
Only storm and blister resistant gelcoats are used to form the skin of each Pumpout Boat, a wide variety of colors are available. White is our standard color included in the quote price; other color choices would be extra cost.
The fuel tank is 50 gallons and located below the deck.
A built in 420 gallon fiberglass holding tank below the water line, is a standard feature on our 23’ Pumpout Boat. The containment cell has 5 layers of fiberglass that include 4 layers of 24 oz. Cloth. Our containment cell has 4 baffles. The Edson pump that runs the sewage tank is located completely under the center console. In addition, under the console is the intake, and discharge pipes. Leaving the entire deck free to any trip hazards and much needed additional working space. The vent is located outside the starboard hull. The tank has an alarm that sounds when tank is full.
Warranty - 23' Pumpout Boat
Marine BoatBuilders Company offers a five (5) year warranty on the hull and a 5-year warranty on the holding tank.
Engine - 23' Pumpout Boat
Your Choice. (Recommended: 200 HP Mercury Four Stroke With digital gauges)
©2021 Marine Boatbuilders Company, Warwick RI | rickjr@marineboatbuilders.com | 401.732.1975
Home | About Us | Our Boats | Resources | News | Get a Quote | Contact Us
19' Pumpout Boats | 20' Pumpout Boats | 23' Pumpout Boats | 26' Pumpout Boats | 31' Pumpout Boats |
Used Pumpout Boats | 19' Patrol Boats | 23' Patrol Boats | ADA Compliant Floating Restrooms
Website Designed by AQ | Website Admin | Sitemap | Copyright 2020